気になるラダーサーボ

450 3Gのラダーの不調から、何か良いサーボが無いか、海外通販を徘徊していたら、こんなのを見つけちゃった (((o(*゜▽゜*)o)))


http://www.hobbyking.com/hobbycity/store/uh_viewItem.asp?idProduct=9980


これ！めっちゃ早く無いっすか？

ブラシレスモーターで6.0v 0.03se/60°っすよ！ (￣▽￣)

気になるぅ～～～♪(#^.^#)








Turnigy BLS980 Digital Heli Rudder Servo

Compatible with Super Narrow Pulse (760 s) drive.
Suitable Gyros: Spartan DS760, Spartan Quark, Futaba GY611, GY601, GY520, ALIGN GP700, GP750, Mikado V-Bar Tail, CSM SL720, Curtis Youngblood Mini-G, Solid G, Thunder Tiger TG-7000
Specification:
Dead band: 0.0004ms (Default)
Control System: +Pulse Width Control
Working frequence: 760μs / 560hz
(RX) Required Pulse: 3.5 ~ 6.0 Volt Peak to Peak Square Wave
Operating Voltage: 4.0 ~ 6.0 V DC Volts
Operating Temperature Range: -10 to + 60 Degree C
Operating Speed (4.8V): 0.04 sec/60° degrees at no load
Operating Speed (6.0V): 0.03 sec/60° degrees at no load
Stall Torque (4.8V): 2.5 kg.cm (34.7 oz/in)
Stall Torque (6.0V): 3.1 kg.cm (43.0 oz/in)
360° Modifiable: NO
Motor Type: Brushless Motor
Potentiometer Drive: Indirect Drive
Bearing Type: Dual Ball Bearings
Gear Type: Titanium Gears
Programmable: NO @
Connector Wire Length: 24.0 cm (9.40 in)
Dimensions: 40 x 20 x 40 mm ( 1.57x0.79x1.50 in)
Weight: 58.0 g (1.97 oz)